• Users Online: 949
  • Home
  • Print this page
  • Email this page
Home About us Editorial board Ahead of print Current issue Search Archives Submit article Instructions Subscribe Contacts Login 


 
 Table of Contents  
CLINICAL REPORT
Year : 2018  |  Volume : 18  |  Issue : 6  |  Page : 106

37. Friction fit removable prosthesis –a case report


Melaka Manipal Medical College

Date of Web Publication30-Nov-2018

Correspondence Address:
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0972-4052.246613

Rights and Permissions

How to cite this article:
Kamath V. 37. Friction fit removable prosthesis –a case report. J Indian Prosthodont Soc 2018;18, Suppl S2:106

How to cite this URL:
Kamath V. 37. Friction fit removable prosthesis –a case report. J Indian Prosthodont Soc [serial online] 2018 [cited 2018 Dec 15];18, Suppl S2:106. Available from: http://www.j-ips.org/text.asp?2018/18/6/106/246613



Introduction: the field of implant dentistry has gained vast acceptance and popularity over the years. A newly evolving idea is the use of syncone concept for the rehabilitation of edentulous ridges.. . Case description a 47 year old male patient reported to the department of prosthodontics with a chief complaint of missing teeth. A radiographic stent was fabricated after clinical examination of maxillary ridge followed by orthopantomograph (opg). Adequate bone was noticed and two 11 mm implants in anterior and two 8mm implants in posterior region were placed. Prosthetic phase was carried out after 4 months. Taper cap degulor for syncone (5°) were placed on to the abutments. The metal framework was fabricated and then a denture base and occlusal rim was made which was followed by recording jaw relation. Trial of waxed up denture was done and it was processed. Denture fit in was done and an orthopantomograph (opg) was made to check for the fit.. . Discussion: the syncone concept is gaining wide popularity because of its high end retention and telescopic design offered by the coping. These two characteristic of this system helps in fabricating a prosthesis that has high stability and excellent performance as a fixed restoration which at the same time can be removed by the patient for daily maintenance.. . Conclusion: the excellent retention, stability, functional and aesthetic properties offered by the syncone concept makes it a favourable choice in implant supported overdentures in the field of implant dentistry…






 

Top
 
 
  Search
 
Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
Access Statistics
Email Alert *
Add to My List *
* Registration required (free)

 
  In this article

 Article Access Statistics
    Viewed23    
    Printed0    
    Emailed0    
    PDF Downloaded8    
    Comments [Add]    

Recommend this journal


[TAG2]
[TAG3]
[TAG4]