• Users Online: 568
  • Home
  • Print this page
  • Email this page
Home About us Editorial board Ahead of print Current issue Search Archives Submit article Instructions Subscribe Contacts Login 
Year : 2019  |  Volume : 19  |  Issue : 1  |  Page : 88-92

Two-visit CAD/CAM milled dentures in the rehabilitation of edentulous arches: A case series

1 Private Practitioner, Muvattupuzha, Kerala, India
2 Department of Prosthodontics, Christian Dental College, CMC, Ludhiana, Punjab, India

Correspondence Address:
Dr. Anish Varkey John
Dentcare Dental Lab Pvt. Ltd., Muvattupuzha, Kochi - 686 661, Kerala
Login to access the Email id

Source of Support: None, Conflict of Interest: None

DOI: 10.4103/jips.jips_252_18

Rights and Permissions

Computer-aided design-computer-aided manufacturing (CAD-CAM) has now found its place in the field of removable prosthodontics with the advent of its use in the fabrication of complete dentures. The conventional technique, by injection or compression molding using heat-polymerized resins, requires cumbersome laboratory procedures and up to five patient visits. For patients with time constraints and clinicians with a higher throughput rate, the CAD-CAM approach with a digital workflow can reduce the number of appointments and ensure speedy delivery of the prosthesis. This article describes the rehabilitation of completely edentulous arches using the Baltic Denture System (Merz Dental GmbH®) in just two patient visits.

Print this article     Email this article
 Next article
 Previous article
 Table of Contents

 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
 Citation Manager
 Access Statistics
 Reader Comments
 Email Alert *
 Add to My List *
 * Requires registration (Free)

 Article Access Statistics
    PDF Downloaded160    
    Comments [Add]    

Recommend this journal